Vehicle mount is a tool for connecting arm and car. The post clamp size is 1.5” and 2.0”, clamp can be adjusted fore and aft angle 45°, the arm angle can’t be adjusted. It’s optional for all Movcam systems.
Fix it on the front side of mounting stage for supporting focus receiver. Standard configuration of AvantS, optonal for all other systems.
The angle adjustable vehicle mount is a tool for connecting arm and car. The post clamp size is 1.5” and 2.0”, clamp can be adjusted fore and aft angle 45°, the arm angle is adjustable. It’s optional for all Movcam systems and other brands
Docking bracket for AvantS and D200, it used for hanging sled and arm, size 5/8”, fit on the 15.8cm tripod, hanger for hanging the arm, holes in the middle for putting allen wrenches and tools.
Fix it on the bottom of camera, Optional for all systems
Motor rod bracket, post diameter 15*150mm, it’s used for installing focus receiver, for Pro-maxA/Pro-max
camera power cable: connecting upper junction box to camera
Power cable connecting from upper junction box to camera
AV cable: transmit video, conneting from camera to upper junction box. Use it if camera has no video out for BNC.
Product name: Color TFT-LCD
Receiver frequency district: 48.25 Mhz-863.25 MHz(can receive the additional channel)
Screen size: 7 inches
This cable connecting upper junction box to red camera, supply power to camera.
Docking bracket for D202, it used for hanging sled and arm, size 5/8”, fit on the 15.8cm tripod, hanger for hang the arm, holes in the middle for putting allen wrenches and tools.
Lengthen dovetail plate for D202/D202a/D204/AvantT, length 23cm, material aluminium, surface anodized.
lengh 23cm, material aluminium, surface anodized,optional for Promax/PromaxA
It's installed on sled for supporing monitor. For D200/D201a/D202/D202a/AvantS
Motor rod set, post diameter 15*150mm, it’s used for installing focus receiver,optional for D202/D202a/D204
Motor rod bracket, post diameter 15*150mm, it’s used for installing focus receiver, for Pro-maxA/Pro-max
This cable connecting upper junction box to red camera, supply power to camera.
Work with arms, it used for adjusting the height of camera lower than ordinary use. Size:15.8mm. Fit for all movcam systems and Steadicam EFP,GPI, Artemis arms.
It’s used for adding weight when adjusting balance, weight 1kg, clamp size 15m,fix it on the conneting post of sled bottom. It's fit for D202/D202A/D204/AvantT/Pro-maxA
Optinal for all system. Intall the camera inside the cage when shooting need low mode, adjust the place of base plate and height of cage depend on the camera weight and gravity center, rod diameter 15mm*38mm, it's for HDV, HDW, DVCPRO, BETACAM etc.
Standard Pro-max dovetail plate, lengh 21cm, material aluminium, surface anodized, fit for Pro-max/Pro-maxA
Standard dovetail for D200/D201A/AvantS, length 17cm, material aluminium, surface anodized.